bz.llcitycouncil.org
How-to

How to record audio on an ios device from another source

How to record audio on an ios device from another source


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.


For the purposes of this document I will be recording from an FM radio but you can use whatever device you want.

Plug one end of the audio lead into the iRig. Note, there is a good chance you will need a 2.5mm to 3.5mm converter as the iRig uses the 3.5mm socket.

As I am using an FM radio here I need to connect the dual-socket 2.5mm stereo to single male 2.5mm stereo connector to the FM radio. This allows the audio lead to be connected as well as headphones.

Headphones are a must as for most small FM radios they act as the antennas so the splitter is needed to work properly. As such the splitter MUST be connected to the FM radio and not the iRig.

Connect iRig to the iOS device you wish. In my case an iPad.

For the purposes of this document I will being using GarageBand for iOS but you can use any application that can record audio, e.g. AudioNote, Notability, or even the Voice Recorder on the iPhone.

Scroll until you see Instruments then click on the microphone icon.

If the icon shows a stereo jack you have the iRig connected correctly. If it shows a microphone then check the connection. To record simply click the record icon and click it again to stop recording.


Watch the video: Send Audio Directly From an Interface to iPadiPhone


Comments:

  1. Ismael

    I believe that you are wrong. I'm sure. I can defend my position.

  2. Athanasios

    everything can be =))))))

  3. Quin

    The highest number of points is achieved.I like this idea, I fully agree with you.

  4. Laertes

    Between us, I recommend that you search google.com

  5. Ogilvie

    Agree, the message very useful



Write a message